Products
Contact Us
- Contact Person : Ms. Chen Angela
- Company Name : Ningbo Haiming Plastics Machinery Co., Ltd.
- Tel : 86-574-56178858
- Fax : 86-574-56178108
- Address : Zhejiang,Ningbo,No.18 Yongtai Road
- Country/Region : China
- Zip : 315040
Injection Moulding Machine HMW10800-F5
Product Detailed
Related Categories:Plastic Injection Machinery
Detailed Product Description
Standard equipment:
1) Double cylinder balancing injections
2) High-torque oil-motor preplasticizing
3) Five pivots minus relief angle, double toggles, machine hinge
mold locking
4) Cabinet-type holder integrates the mold plate
5) Oil motor driven gear mold adjusting
6) Storage-type grease lubricating
7) Pressure and flow whole-proportion running
8) High-performance, low-noise oil pump
9) Multi-step pressure and speed adjusting
10) High-precision position linear transducer
11) Digital memory for mold group
Injection unit:
1) Four injection pressures and speeds with three additional
pressures and speeds
2) Suck back function
3) Cold start protection
4) Pre-suck back function
5) Linear displacement transducer accurately monitor injection
position, providing optimum. Injection accuracy and control
6) Temperature control
7) Heating status indication
Clamping unit:
1) Three clamp close and open pressures and speeds
2) Mold protection function
3) Hydraulic ejector stroke controlled by transducer
4) Automatic hydraulic die-height adjustment driven by planetary
gears system
5) Adjustable support under moving platen
6) Automatic high pressure toggle lubrication with low oil level alarm
7) Mechanical, electrical and hydraulic safety interlock devices
8) Linear displacement transducer controls clamping position
Other parts:
1) Independent core in / out pressure and speed
2) Hydraulic unscrewing sequence
3) Hydraulic oil high temperature alarm
4) System pressure gauge
5) Shot counter and reset function
6) Malfunction alarm light
7) Self-diagnostic function
8) Emergency stop buttons placed on both front and rear of machine to provide
easy access
Main specification of HMW10800 | Screw A | Screw B | Screw C | |
Injection Unit | ||||
Screw Diameter | mm | 110 | 120 | 130 |
Screw L/D Ratio | L/D | 22 | 20.2 | 18.6 |
Shot Volume (theoretical) | CM³ | 4618 | 5496 | 6450 |
Injection Weight (PS) | g | 4202 | 5001 | 5870 |
Injection Rate | g/s | 806 | 936 | 1099 |
Plasticizing Capacity | g/d | 101 | 112 | 125 |
Injection Pressure | MPa | 178 | 150 | 127 |
Screw Speed | rpm | 0-110 | ||
Clamping Unit | ||||
Clamp Force | KN | 10800 | ||
Toggle Stroke | mm | 1120 | ||
Max. Mould Height | mm | 1200 | ||
Min. Mould Height | mm | 450 | ||
Space Between Tie Bars (W×H) | mm | 1100x1100 | ||
Ejector Force | KN | 245 | ||
Ejector Stroke | mm | 320 | ||
Ejector Numbers | n | 21 | ||
Others | ||||
Max Pump Pressure | MPa | 16 | ||
Pump Motor Power | kW | 45+45 | ||
Heater Power | kW | 68.5 | ||
Machine Dimension (L×W×H) | m | 14.15x2.6x3.5 | ||
Machine Weight | T | 60 | ||
Hopper Capacity | L | 100 | ||
Oil Tank Capacity | L | 1700 |
Other products